CART / CHECKOUT (0)
TOLL FREE: 855-330-5272

Help Guides | Jinma Tractor Parts & Wood Chipper Articles

Latest Posts

  • Identifying Your Jinma Tractor Oil Filter

    You probably know how important it is to change your oil and oil filter regularly as part of your Jinma Tractor maintenance, but you might not be as clear on how to find the right filter for your sp...

  • Maintaining Your PTO Wood Chipper

    Whether you have owned a woodchipper shredder for a long time or you’ve just recently purchased one such as the Jinma PTO Wood Chipper, there are practices you can implement to keep your machi...

  • Wood Chipper Shredder Safety Guidelines

    Anytime you are operating heavy duty machinery such as a wood chipper shredder, you should do so with utmost caution and attention. Whether you are using a PTO wood chipper, gas powered chipper, or an...

  • Engine Torque and Valve Clearance Specifications

    Here are the specifications for engine torque and valve clearance for the most common engines found in Jinma tractors, Farm Pro tractors, NorTrac tractors, and other Chinese-made tractors: TY290 Engi...

  • How To Wire an Ignition Switch

    It is always recommended that you label each wire before you remove the old ignition switch. Typical wiring for the JK290A Ignition switch is below, however the existing wiring may vary.   ...

  • How to Test the Starter and Solenoid

    When your starter is working as it should, turning the ignition key sends a low current (12-volt) signal through the clutch safety switch to the small terminal on the solenoid. The solenoid then engag...

  • New Website Features

    For this installment we wanted to make sure you know how best to take advantage of our new website design. On the home page, you now have the opportunity to filter by the make and model of the tractor...

  • Maintaining Your Jinma Tractor in the Off-Season

    The maintenance of your Jinma tractor and other equipment in the off-season is just as important as the maintenance you perform during peak usage. Any time a tractor or a piece of heavy equipment is n...

  • Why Won’t My Tractor Start (Part 2)

    This is the second installment in this troubleshooting series. In our first article, we looked at issues with the ignition switch, battery, and starter. Now we are going to run through a scenario wher...

  • Jinma 3 Finger Clutch Adjustment

    On your Jinma tractor, clutch adjustments are done through the inspection cover on the side of the bellhousing, with the clutch installed on the flywheel. If you have a front-end loader attached to th...